Description of the operation of the controls of the compressor.
Threshold sets the level above which compression takes place. Signals
below the threshold will remain unaltered.
Ratio is the 'strength' of compression above the threshold level.
The higher the ratio, the greater the effect. If the ratio is set at 5:1,
it means that when the signal is above the threshold level, when the input
signal rises by 5 dB, the output signal rises by 1 dB.
At a compression ratio of 2:1, the effect is mild and suitable for the subtle
compression of vocals or for a complete mix. At 10:1, compression is much
stronger and more noticeable. Ratios between 5:1 and 15:1 are suitable for
the 'compressed' sound, used as an effect in its own right. Higher ratios
are used for the control of extremely peaky signals. Above 20:1, the compression
effect is so pronounced that it is known as 'limiting'. It is possible to
buy a dedicated limiter.
The point where the slope of the compressor curve changes is known as the
Knee. Some compressors have an adjustable knee, variable between hard
(which is normal) and soft:
With a soft knee, signals which only just exceed the threshold level are compressed
at a low ratio, the ratio increasing the higher the signal level.
Attack sets the time the compressor takes to respond once the threshold
has been exceeded. Attack may be set so that the initial transient of the
instrument passes through unaltered, or set to a faster value so that the
very start of the sound is compressed. Particularly with drum sounds, careful
adjustment of attack time can make the sound more 'punchy' and 'driving'.
Release time plays a very important role in compression. During periods
of high signal level, gain is reduced. When the signal level falls below the
threshold, the gain will increase at a rate determined by the Release control.
If the release time is short, the gain will rise quickly. A long release time
will mean that the gain will stay at its reduced level, only recovering gradually:
The setting of the correct release time is a compromise. If the release time
is too short, background noise can cause effects often known as 'breathing'
and 'pumping'. If the release time is too long, the signal will not be compressed,
but simply reduced in level. For effective compression, the release time must
be set to as short a value as possible before modulation of the background
noise becomes too noticeable. The gain reduction bargraph meter will show
how much actual compression is going on. If it stays steady, there is little
active compression, just a steady-state reduction in level. The faster the
bargraph moves up and down, the harder the compressor is working.
restores the level lost in the compression process. Since
the compressor works by bringing down peak levels, the level of the output signal
would be lower than the input if nothing were done. Sufficient gain make up
should be applied so that the peaks of the compressed signal are the same level
as the peaks of the inputs signal. The sections of the input signal that were
quiet will now be louder.
Stereo Link: When a stereo signal is compressed, the stereo link has
to be activated so that both channels provide the same amount of gain reduction.
If this is not done, a loud signal in one channel will cause that channel
to be lowered in level while the other stays the same. Any signal that is
panned center in the mix wiill swing in the stereo image towards the unaltered
channel. With stereo link selected, the stereo image is maintained.
Does your school have a studio? Does it work?
It's exciting for a school to have a music recording studio installed. But getting it working and keeping it working are often two very different things. Read more...
Scientific test picks out best converter!
Put four converters to the test, in a pro studio with pro testers. See which one comes out best. Or is the result a foregone conclusion? Read more...
Before you do anything else, get the tempo right
Many people blunder into a new recording without giving tempo more than half a moment's consideration. But setting the right tempo can make or break a track... Read more...
Q: How should I set the compressor in a live stage show?
A RecordProducer.com reader who is a live sound engineer has a compressor, and he is determined to use it. Is this a good idea? Read more...
Do we really need 200 more features and 20 pages of tutorials?
Apple's new OS Mountain Lion apparently has more than 200 new features and you need 20 pages of tutorial to understand them. In what way is this a good thing? Read more...
Microphones - will we always hook them up to a preamplifier?
In the future, microphones won't be like the microphones we use today. We won't have to hook them up to a preamplifier. Whoa this is heavy... Read more...
An unusual pair of loudspeakers that fire UPWARDS!
Why have loudspeakers that fire sound at you when you can have loudspeakers that spray sound all around the room. Those crazy Swedes... :-) Read more...
Will your multitrack recordings be playable a year from now?
You spent a week recording your best and finest track. It took a year to get a label to accept it. But they want a remix and your multitrack won't play. What do you do? Read more...
Can you get good people to work with you?
It's all very well being very good at what you do. But will the people you work with have an influence on the success of your career? Read more...
How complicated do your monitors have to be?
Do your monitors have digital FIR filters; digital fine-tuning for volume, trim, bass and treble settings; soft fade-in and Crimson Aramid fibre drivers? Your listeners' loudspeakers don't. Read more...
Would you put your head inside a piano? No? Then why place a microphone there? [with video]
Sometimes unusual microphone placements can capture an interesting sound. In this instance, the sound is completely wrong. Read more...
Sampling rates for sample libraries
I always set up my projects at 24 bits/44.1 kHz, but recently I noticed how sample libraries are offering 32 bits/96 kHz. Do you think we have to use them? Read more...
How to achieve a huge bass drum sound with EQ, reverb and compression
An RP reader hears a huge bass drum on a hit record. He wants to know how to achieve it himself. Read more...
Achieving the 'mastered sound' while keeping a wide dynamic range
The mastered sound is very popular these days. But does it always have to come at the expense of dynamic range? Read more...
Jones For Tones Productions
Jones For Tones is a Vancouver based music production company with a focus on songwriting, owned and operated by session bassist/recording artist Tony Marriott. Read more...
Output impedance - does it matter how much current an output can supply?
This is a tricky concept to explain and understand. But once you do understand it you'll feel an awful lot better. In fact, you'll probably feel so good you will consider yourself one of the 'elite' of sound engineering and look down upon lesser mortals who do not understand it... Read more...
Q: What is the difference between a demo and a master?
Can you tell me the difference between a demo and a master, in terms of what they are used for and how they should sound? Read more...
How much should you charge for your audio services?
You've been asked to make a recording of some local musicians, and they expect to pay you. Wow - you're a pro! But how much should you charge? Read more...
Help! I have too much equipment. What can I do?
A Record-Producer.com visitor complains that he has too much equipment and wants to get rid of half of it. Trouble is - he doesn't know which half... Read more...
Q: How do you use a mixing console with the Pro Tools Mbox?
I want to use a mixing console like they have in pro studios. I need to connect it to my Pro Tools Mbox audio interface. How can I do this? Read more...