"There is background noise in my studio. Should I use a noise-reduction plug-in?"

David Mellor

David Mellor is CEO and Course Director of Audio Masterclass. David has designed courses in audio education and training since 1986 and is the publisher and principal writer of Record-Producer.com.

Thursday August 1, 2019

A question from an Audio Masterclass student...

"I have a question about noise suppressors. Is a noise suppressor really worth the money because of signal loss during the process, and if so, which one of these would you recommend?"

There is a balance to be struck here between being a purist and being a pragmatist. But suppose you had an important project and hired a top studio at a rate of $2000 a day, which is what top studios do charge. They tell you that there's some building work going on outside, but they have a noise-reduction plug-in so it will be OK. Well unless that was the only studio in town and the work absolutely had to be done there, there's no way I would even consider this.

Professionally, the standard is to record in a well-insulated studio where noise isn't a problem. But suppose you record at home and noise is a problem. Will a noise reduction plug-in solve it?

There is no doubt that modern noise reduction software can be useful. But this is where the purist in me asks the question, "What's the point of recording to 24-bit/96 kHz resolution, then messing about with it?". As someone who remembers the horrendous noise level of analog tape, being able to achieve 24/96 resolution is like achieving Nirvana.

Call me old-fashioned if you like, but I doubt if I will ever come to believe that using a noise-reduction plug-in can ever be as good, or as right, as recording with a quiet noise background. No matter how far the technology advances, it will always have to choose between what is noise and what is wanted signal. And I just can't see how it can do that to an accuracy of 1 part in 16,777,216, which is the resolution of a 24-bit recording, less a small margin for dither.

And you have to consider where you should concentrate your attention. Optimizing the settings on even a simple noise-reduction plug-in takes a lot of care and attention. But if you're working with a quiet noise background, then during recording you can devote yourself fully to your performer and the sound coming from the microphone, safe in the knowledge that during editing and mixing, you won't be distracted by the artefacts that noise-reduction plug-ins inevitably create.

But there are exceptions. If you are given a recording to work with that has background noise, then you'll either have to put up with the noise, or use noise-reduction software. Which you choose depends on the preferences of your client or your market.

Or you might have had to record in a noisy environment. An example of this would be an interview with a celebrity of some kind, done out of necessity on location rather than in a studio.

Another scenario is audio for film or TV. Often the needs of the picture come before the needs of the sound. So the director might have called 'cut and print' on a take that was visually perfect, but sonically deficient. Too bad. The sound department is going to have to clean it up somehow.

So in summary, my personal view is that the standard to aim for is to record with a quiet background noise level. That's the way professional studios work. They are the people you'll be competing with, and you'll be competing on the quality of your work, not the quality of your excuses.

But if you really have to. If you really, really have to, then modern noise-reduction software can do a remarkable job.

One more thing... the question asked for a recommendation. Well I've tried a number of noise reduction softwares and my experience is that they are all different. Sometimes very different, sometimes subtly different. One might work better on speech than on instruments, another might handle constant background noise better, another works well for impulsive noise. Comparing demo versions on your own actual problem is the way to choose.

Like, follow, and comment on this article at Facebook, Twitter, Reddit, Instagram or the social network of your choice.

Come on the Audio Masterclass Pro Home Studio MiniCourse - 60 great hints and tips to get your home recording studio MOVING

It's FREE!

Get It Now >>

An interesting microphone setup for violinist Nigel Kennedy

Are you compressing too much? Here's how to tell...

If setting the gain correctly is so important, why don't mic preamplifiers have meters?

The Internet goes analogue!

How to choose an audio interface

Audio left-right test. Does it matter?

Electric guitar - compress before the amp, or after?

What is comb filtering? What does it sound like?

NEW: Audio crossfades come to Final Cut Pro X 10.4.9!

What is the difference between EQ and filters? *With Audio*

What difference will a preamp make to your recording?

Watch our video on linear phase filters and frequency response with the FabFilter Pro Q 2

Read our post on linear phase filters and frequency response with the Fabfilter Pro Q 2

Harmonic distortion with the Soundtoys Decapitator

What's the best height for studio monitors? Answer - Not too low!

What is the Red Book standard? Do I need to use it? Why?

Will floating point change the way we record?

Mixing: What is the 'Pedalboard Exception'?

The difference between mic level and line level

The problem with parallel compression that you didn't know you had. What it sounds like and how to fix it.

Compressing a snare drum to even out the level

What does parallel compression on vocals sound like?

How to automate tracks that have parallel compression

Why mono is better than stereo for recording vocals and dialogue